Read MORE about multiswitches - click HERE

Nearly all multiswitches now require a QUATTRO LNB to be fitted to the dish. The Vision multiswitches are mains powered and are suitable only for installation indoors in a dry environment, such as a well-ventilated loft area. (It gets hot so please mount it on a wall or suitable support). It uses 'F' type screw connectors as described HERE. We recommend WF100 cable HERE.
No instructions or accessories are supplied. It is assumed that the person installing will understand how to connect the unit but, briefly: A Quattro LNB is used. Please connect its outputs to the correspondingly labelled LNB inputs on the multiswitch, marked with coloured triangles. We can supply WF100 cable in the appropriate colours. A terrestrial aerial can be connected to the "IN terr." input. This input supplies 12 volts so it will provide power to a masthead amplifier, if used, and the green LED will light. If an amplifier is not used, the power will shut off automatically if it detects a short-circuit (which most aerials present). If a terrestrial aerial is connected, all 8 outputs should be connected via diplex (decombiner) wall plates, such as our Labgear PSW132 (or equivalent). A Radio aerial may also be connected. To do this, you will need a V24-310 FM+DAB+UHF triplexer. It is important that all aerials provide roughly equal signal levels, in order to minimise the risk of interference. Note that the V24-310 will allow power to pass from the Multiswitch to the UHF TV masthead amplifier (if fitted).

Read MORE about multiswitches - click HERE

DOWNLOAD Specification sheet (PDF file)

Windows users should "right click" a DOWNLOAD link above and choose "save target as" to save the PDF file without launching Acrobat Reader. If you "left click" then Acrobat Reader may launch and act as a "helper" for your browser, preventing the file from being saved in its original form. Mac Users should "ctrl-click" and select "save linked file as" (or similar).

If you do not have "Acrobat Reader" you will also need to download that from here:-
http://www.adobe.com/products/acrobat/readstep.html Free

©2008-2011 SatCure

 Send this page address - CLICK HERE - to a friend !