| Choose the diplexer to suit your requirements. (The choice is limited so this may not be possible). Assuming that all your required TV channels fall within the range of UHF channels 21-51 , you can use two identical diplexers as shown. The aerial signals are fed into the 21-51 side of the top diplexer which removes any signals from channels 53-69. The lower diplexer passes aerial signals out to your TV or Freeview receiver. It allows only the Sky RF out signal to pass up the cable, provided that it's in the range 54 to 68 (the nearer to 61 the better). This Sky signal comes out of the top diplexer and can be fed to one or more TV sets. (If your TV channels fall within the range 35-69, use a 21-33 + 35-69 diplexer instead and set the Digibox RF output to 27.) Use a suitable wall plate. We suggest a C12826 wall plate bezel with C13098 and C13829 modules fitted to it. |